Kenwood MJ909
| Name | MJ909 |
|---|---|
| Manufacturer | Kenwood |
| Released | 1999/03 |
| Device type | auto |
| Recorder | Player |
| MDLP | No |
| NetMD | No |
| Hi-MD | No |
| Radio | Yes |
| Dimensions | 1-Din 178 (W) x 50 (H) x 160 (D) mm |
| Weight | 1700 |
| ATRAC ver | |
| Battery | |
| Sidecar battery | |
| Voltage | 12 |
| Power cable | |
| Price (launch) | |
| ¥79 000 |
|
| - | |
| Inputs | |
| Outputs | |
| Control |
with a bank-type 3+1MD changer in a 1DIN size housing. In addition to enjoying up to 3 MDs as a changer, you can use it as a single MD player by inserting an add-on MD. The display uses a multi-functional full-dot FL tube. Divided into upper and lower tiers, display with variations. The MJ909 has separate ATRAC and DAC circuit configurations, and is equipped with a newly developed “advanced multi-bit DAC” that incorporates the latest technology, which is unusual for car audio MD. It enables 24-bit processing that achieves sound quality comparable to high-quality MD home audio. The newly developed hybrid IC “System E's PRO”, which further improves the functions of “System E's”, twin stabilized power supplies, and an ultra-high power amplifier of 44W x 4ch, achieves the best sound quality in this class
[MD Department]
- Frequency response: 20Hz to 20kHz (±1dB)
- S/N ratio: 98dB (1kHz)
- Dynamic range: 98dB
- Stereo Separation: 92dB
[FM section]
- Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)
[AM section]
- Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ
[Audio part]
- Maximum output: 44W x 4
- Rated output: 28W x 4 (4Ω, 1kHz, 10%THD)
- Pre-out level: 1500mV (FM/10kΩ)
[Common part]
- Power supply voltage: 14.4V (11 to 16V)
- Maximum current consumption: 10A
- Embedded dimensions: 178 (W) x 50 (H) x 160 (D) mm
- Mass: 1,700g
Content adapted from: Kenwood Press Release (archived)
Manuals
Repair
Photos
Submit your own! Edit the page, use the photo submission form, or Contact us.